Description
Description
- Waveshare EVK407I STM32F4 Development Board
- Features high-performance STM32F407IGT6 MCU
- Integrates wide range of communication interfaces
- Supports extensive debugging and programming
- Includes comprehensive development resources
- Provides diverse connectors for expansion
The Waveshare EVK407I STM32F4 Development Board is a comprehensive development platform designed for advanced microcontroller applications. It integrates a mother board and an MCU core board, featuring the high-performance STM32F407IGT6 microcontroller. This microcontroller is based on the Cortex-M4 32-bit RISC architecture, offering a full set of single-cycle DSP instructions and operating at a frequency of 168MHz.
The development board supports a wide range of communication interfaces, including SPI, USART, UART, I2S, I2C, FSMC, SDIO, CAN, and USB 2.0 with high-speed/full-speed device/host/OTG capabilities. It also includes an Ethernet MAC and a parallel camera interface, making it suitable for diverse applications. The board is equipped with multiple crystals to support various clock frequencies, enhancing the performance and functionality of the microcontroller.
Additional features include onboard power management devices, a NAND Flash memory, and various connectors for USB and Ethernet. The board provides extensive debugging and programming support through JTAG/SWD interfaces. It also includes user-friendly components such as LEDs for status indication and a joystick for input.
The development resources provided include software tools, example codes, and comprehensive documentation to facilitate the development process. This board is ideal for developers seeking a robust platform for prototyping and testing STM32-based applications.
- 1x Waveshare EVK407I STM32F4 Development Board
- 1x 3.2-inch 320×240 touch LCD
- 1x USB type A plug to mini-B plug cable
- 1x USB type A receptacle to mini-B plug cable
- 2x 4-pin wire
- 1x USB power cable
- 1x Software CD
Website
- STM32F407IGT6: High-performance STM32 microcontroller unit (MCU)
- Core: Cortex-M4 32-bit RISC
- Feature: Full set of single-cycle DSP instructions
- Operating Frequency: 168 MHz, 210 DMIPS/1.25 DMIPS/MHz
- Operating Voltage: 1.8V-3.6V
- Package: LQFP176
- Memories: 1024 kB Flash, 192+4 kB SRAM
- MCU Communication Interfaces: 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x FSMC, 1 x SDIO, 2 x CAN
- USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI, and on-chip full-speed PHY
- 10/100 Ethernet MAC
- 8 to 14-bit parallel camera interface
- AD & DA converters: 3 x AD (12-bit, 1 μs, shares 24 channels); 2 x DA (12-bit)
- Debugging/Programming: Supports JTAG/SWD (serial wire debug) interfaces, supports IAP
- MIC2075-2, onboard USB FS power management device
- AMS1117-3.3V voltage regulator
- K9F1G08U0E, 1G Bit NandFlash
- DP83848, Ethernet PHY
- MIC2075-1, onboard USB HS power management device
- USB3300, USB HS PHY
- Power supply switch, powered from 5V input or USB connection
- Boot mode switch, for configuring BOOT0 pin
- Power indicator
- USB FS LED
- USB HS LED
- Reset button
- 8M crystal, MCU clock, enables the MCU to run at higher speed by frequency multiplication
- 24M crystal, USB3300 clock
- 50M crystal, DP83848 clock
- 32.768K crystal, for internal RTC with calibration
- Ethernet connector
- USB FS mini connector
- USB HS mini connector
- USB HS type A connector
- MCU pins expander, VCC, GND, and all the idle I/O ports are accessible on expansion connectors for further expansion
- USB OTG/HOST jumper
- VREF/VBAT jumper
- Ethernet I/O selection solder joint
- USB HS I/O selection solder joint
- PDR selection solder joint: 1.8-3.6V, -40 to 105°C or 1.7-3.6V, 0 to 70°C
Reviews
There are no reviews yet.